AntMiner T9 - New - (11.5TH/s Bitcoin Miner) 16nm (Pre-Order/Limited Quantity). SOLD OUT
Ships from Greater Toronto Area, Canada. *Free Expedited shipping in Canada.
NEW BATCH PRE-ORDER Shipping by February 2017.
**This miner does not include the PSU (power supply). To start mining right away - you will need an Ethernet cable, Power Supply and a power cable for the PSU**
Brand New 16nm Technology - EXTREMELY Limited Quantity - PRE-ORDER ONLY. NON-REFUNDABLE.
Hash Rate 11.5TH/s. A variation of +/- 5% is expected.
Power Consumption 1450W +7% (at the wall, with Bitmain's APW3 PSU, 93% efficiency, 25°C ambient temperature)
Power Efficiency 0.126J/GH + 7% (at the wall, with Bitmain's APW3 PSU, 93% efficiency, 25°C ambient temperature)
Rated Voltage 11.60 ~ 13.00V
Chip Type BM1387
Chip quantity per unit 171 chips
Dimensions 350mm (l) x 135mm (w) x 158mm (h)
Cooling Two 12038 fans. Front fan: 6000RPM, rear fan: 4300RPM
Operating temperature 0°C to 40°C
Network connection Ethernet
- Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
- Power supply unit is not included. You will need an ATX PSU. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!
Bitmain recommends the APW3+ power supply for both the T9 and S9 miners. It cannot power more than one miner.
- Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only afterall the 10x PCIE connectors are connected to power supply.